|
Description
DVI (Digital Video Interface) recently has become increasingly popular in the application of video transmission system. In view of the extreme of electrical performances, however, the traditional copper wire cable imposes limits on signal transmission distance and signal quality. In reality, optical fiber is of low dispersion, which in turn has the strength of longer signal transmission distance and better signal transmission quality in comparison to the traditional copper wire cable. ACE PLUS DVIE003 DVI Dual-linkextender provide the DVI dual-link Digital Video, Full-duplex RS232 and Audio transmitting capability through the optical fiber. This all optical transmitting solution can fulfill customer’s need in far-end Video/Audio broadcasting and data control, which shows the advantage of high performance and good signal quality as well as low cost.
Features
Long distance DVI dual-link digital video, audio and RS232 transmission
High resolution and image quality
Pseudo-EDID with auto-learning function
No RF Interference by optical fiber
External hardware installation, free of software or driver installation
Class 1 laser product complies with EN 60825-1
Application
Remote monitor for traffic, industrial, military control
LCD, Projector, Plasma display connection
Large video wall system
Theater
Ordering information
|
Part Number |
Description |
Note |
|
DVIE003-TX-XX |
Transmitter side |
DVI Dual-link x1,
2-way full-duplex RS232 x1
Audio
x1
|
|
DVIE003-RX-XX |
Receiver side |
|
DVIE003-XX |
Transmitter + Receiver
XX 01: US Plug for AC adaptor
02: EU Plug for AC adaptor
03: UK Plug for AC adaptor |
This product does not include optical fibers
Specification
|
PARAMETER |
SPECIFICATION |
NOTE |
|
Max length |
500 m |
4x50/125m or 62.5/125 MM glass fiber (The length difference between these 4 fibers should be less than 0.5m)
|
|
Optical Power Budget |
10 dB |
|
|
Max resolution |
DVI dual link (2560x1600) |
|
|
Max DVI bandwidth |
1.65 Gbps per channel |
|
|
EDID support |
Pseudo DDC |
With auto-learning function |
|
HDCP compliant |
No |
|
|
Operating voltage |
DC 5V |
|
|
Electrical Power consumption |
TX: 3W |
5V/600mA |
| RX: 3W |
5V/600mA |
|
Operating Temperature |
-10℃
to 50℃ |
|
|
Storage Temperatute |
-20℃
to 75℃ |
|
|
Operating
Temperature |
-10℃
to 50℃ |
|
|
Storage
Temperatute |
-20℃
to 75℃ |
|
|
Dimension |
180 x 120 x 30 |
L
×
W
×
H (mm) |
|
Weight |
~ 600g |
TX or RX |
| LED indicator |
Power: Power indicator
Fiber: Fiber link signal Source: DVI source indicator Sink: DVI sink indicator
EDID: Auto-learning indicator |
|
Adaptor
Specification
|
PARAMETER |
SPECIFICATION |
NOTE |
|
Input |
100~240VAC |
US plug |
|
Output |
DC 5V |
1.0 A |
|
DC Jack |
Inside 5V /
Outside
ground |
|
Requirements
DVI Source (DVD player or PC)
DVI Sink (LCD TV or Projector)
100~240VAC 50~60Hz 0.2A electricity
Pseudo
EDID support
There is virtual EDID data structure in TX module. This provides pseudo monitor information to the host. Then host can work at different modes by reading this data. It supports all standard modes such as VGA, SVGA, XGA, SXGA and UXGA…etc. The initial EDID code which was written in the production line might not include the suitable code for your monitor. You might use Auto-learning function to copy the EDID code from your monitor.
Dimensions
Installation
Important: Please follow the installation procedure below. Improper, or no operation may result if the start-up sequence is not correctly followed.
Step 1：
Carefully unpack the contents of the shipping group. Check the following items:
TX module or RX module
AC/DC Adaptor
Step 2：
Connect each 4xLC fiber cable one by one as indicated number. The channel “1” of TX corresponds to channel “1” of RX. The other channels are the same connection.
Step
3：
Connect the AC/DC
adapter to the RX
module.
Neglect AC/DC adapter to
the TX module. The PC
may supply voltage
source via DVI
receptacle.
Step 4：
Use the DVI, RS232, and Audio cable to connect the each port of TX side to the corresponding ports of PC or DVD players.
Step 5：
Use the DVI, RS232, and Audio cable to connect the each port of RX side to the corresponding ports of display.
Step 6：
Power on the PC and display.
Note1：The set-up of screen might be fitted to the display resolution. It is certain to happen such unfitness if it is first time to boot up in using this extender module. Then, go to Display Properties in Windows systems and click the tap of Settings. Then you can set the right display resolution to meet your display. Once you set the right resolution, you could see displaying the initial screen at the same resolution as just before you powered on.
|
Digital Signage 
