Part Number
DVIE001-01	US Plug for AC adaptor
DVIE001-02	EU Plug for AC adaptor
DVIE001-03	UK Plug for AC adaptor
DVIE001-05	JP Plug for AC adaptor

*This product does not include optical fiber

PARAMETER	SPECIFICATION	NOTE
Max length	500M @ XGA 700M @XGA	62.5/125 MMF 4-LC 50/125 MMF 4-LC
Max resoultion	1600 × 1200 (4:3) 　 1920 × 1080p (16:9) 1920 × 1200 (16:10)
Max DVI bandwidth	1.65 Gbps per channel	Customers optional
EDID support	Pseudo DDC
HDCP compliant	No
Operating voltage	DC 5V
Supply current	180mA±30 280mA±30	TX module RX module
Optical property	4 channels 850nm @-6dBm	VCSEL
Operating Temperature	-0℃ to 50℃
Storage Temperatute	-20℃ to 75℃
Dimension	TX unit : 90 × 40 × 19.6 RX unit : 90 × 40 × 19.6	L × W × H (mm)
Weight	TX unit : 65g ; RX unit : 65g

Requirements

DVI PC or DVI signal source (Transmitter)

DVI Monitor or Projector (Receiver)

100~240VAC 50~60Hz 0.2A

　

Pseudo EDID support

There is virtual EDID data structure in TX module. This provides pseudo monitor information to the host. Then host can work at different modes by reading this data. It supports all standard modes such as VGA, SVGA, XGA, SXGA and UXGA…etc.

　

Dimensions

Safety Regulation

CE and FCC approved.

　

Installation

Important: Please use the installation procedure below. Improper, or no operation may result if the start-up sequence is not correctly followed.

Step 1：

Carefully unpack the contents of the shipping group. Check the following items:

TX module × 1

RX module × 1

AC/DC Adaptor × 2

Plug converter × 2 (Optional)

Step 2：

Connect each duplex LC fiber cable one by one as indicated number. The channel “1” of TX corresponds to channel 1 of RX. The other channels are the same connection.

Step 3：

Connect the AC/DC adapter to the RX module.
Neglect AC/DC adapter to the TX module. The PC may supply voltage source via DVI receptacle.

Step 4：

Plug directly the TX module in the DVI receptacle of PC. Do NOT use any intermediate cable or adapter between them.

Step 5：

Plug the RX directly module in the DVI receptacle of display. Do NOT use any intermediate cable or adapter between them.

Step 6：

Power on the PC and display.

Note1：The set-up of screen might be fitted to the display resolution. It is certain to happen such unfitness if it is first time to boot up in using this extender module. Then, go to Display Properties in Windows systems and click the tap of Settings. Then you can set the right display resolution to meet your display. Once you set the right resolution, you could see displaying the initial screen at the same resolution as just before you powered on.

Note2：You might not use the AC/DC adapter at TX module, but use the power supplied through a DVI pin from the graphic cards. After completing the installation instruction, if the system doesn’t work properly, you could re-connect the AC/DC adapter while all powers for the system are ON.

｜TOP｜Back to Optical Extender ｜Back to Optic DVI Monitor Extender Module｜